B Pump
Main applications
- Building services
- Cooling water and condensate
- Energy
- Groundwaterlevel (mining/buildings)
- Irrigation
- Power Stations < 100 MW
- Power Stations > 100 MW
- Water
- Water Extraction
- Water supply
- Water transport
Technical data
Q max
2,600.0 m³/h
H max
160.0 m
Design
Multistage vertical turbine pump with closed impellers, column section with bearing assembly, shaft sleeve, shaft sealed by gland packing, driven by electric motor or diesel engine.
Application
Pumping clean water in agriculture, collection and irrigation, public water supply, industry, fire-fighting systems
Further technical information about B Pump
Overview of technical data
Q (50Hz) | 10.0 – 2,600.0 (m³/h) |
H (50Hz) | 1.7 – 160.0 (m) |
Barrel casing | Yes |
Type of bearing | Plain bearings |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Type of first impeller | Single entry |
Impeller material (EN standard) | 1.4408, 1.4517, GG-25, NI-RESIST D2 |
Type of installation | In-line |
Type of coupling | Direct |
Type of lubrication | Product lubrication |
Max. permissible fluid temperature | 105.0 (°C) |
Pump set location | Dry installed, Wet well |
Shaft material (EN standard) | 1.4021, 1.4462, 1.4571/AISI 316, C45N |
Standard | EN, EN/ANSI |
Suitable for drinking water | Yes |
Casing material (EN standard) | BZ, D2, DUPLEX, GG, NI-RESIST D2 |
Installation position | Vertical |
Shaft seal type | Gland packing, Mechanical seal |
Main applications | Water |
Casing material | Cast iron, Cast stainless steel, Cast duplex steel, Ni-Resist |
Maximum discharge-side pressure | 16.0 (bar) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (M/M) |