Main applications

  • Biofuels
  • Breweries
  • Chemical industry
  • Desalination
  • Energy
  • Fire fighting and sprinkler systems
  • Food and beverages
  • Industrial waste water
  • Industry engineering
  • Irrigation
  • Municipal waste water
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Pressure boosting
  • Process
  • Pumps used as Turbines
  • Rawwater transport
  • Steel
  • Suspended solids treatment
  • Systems
  • Turbine oil supply
  • Waste water
  • Water
  • Water supply
  • Water works
  • Watertransport
  • Watertreatment

Technical data

Q max 740.0 m³/h
H max 160.0 m


Volute casing pump, single-stage, ratings to EN 733, radially split volute casing, volute casing with integrally cast pump feet, replaceable casing wear rings (optionally available for casings in material variant C), closed radial impeller with multiply curved vanes, single mechanical seals to EN 12756, double mechanical seals to EN 12756, shaft fitted with a replaceable shaft protecting sleeve in the shaft seal area.


Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling water circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems

Further technical information about Etanorm

Overview of technical data

Q (50Hz) 1.5 – 740.0 (m³/h)
H (50Hz) 2.0 – 160.0 (m)
Type of bearing Ball bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection IP 55
No. of impeller entries Single entry
Impeller material (EN standard) 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040 / A 48 CL 35B
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 140.0 (°C)
Guaranteed to be silicon-free Yes
Nozzle position End suction
Maximum operating pressure PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4571, C45+N
Standard EN, EN / ANSI
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040 / A48CL35B, JS1030 / A536 GR 60-40-18
eClass assignment 36410000, 36410100, 36410101
Installation position Horizontal
Shaft seal type Mechanical seal, Gland packing
Main applications Industry and process engineering, Water, Energy, Building services
Casing material Cast iron, Stainless steel, Nodular cast iron, Bronze
Maximum discharge-side pressure 16.0 (bar)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)