BSX-BRY-BRZS-BRE-BSF

BSX, BRY, BRZS, BRE, BSF


Main applications

  • General Processes
  • Groundwaterlevel (mining/buildings)
  • Industry engineering
  • Irrigation
  • Lake, Damwater extraction
  • Snow guns
  • Water
  • Water Extraction
  • Watertransport
  • Well

Technical data

Q max 2,600.0 m³/h
H max 230.0 m

Design

Single- or multistage centrifugal pumps in ring-section design, single entry; for vertical and, depending on the number of stages, angled and horizontal installation; mixed flow hydraulic systems available with reduced impeller diameters; driven by submersible motors. Suction casing fitted between pump and motor, equipped with strainer to protect the pump from coarse particles in the fluid. Permissible sand content in the fluid: 50 g/m³. Pumps with non-return valve or connection branch on option.

Applications

pumping clean or slightly contaminated water in general water supply, irrigation and spray irrigation systems, lowering and maintaining ground water levels, pressure boosting, emergency water supply, as well as mines and fountains etc.

Further technical information about BSX, BRY, BRZS, BRE, BSF

Overview of technical data

Q (50Hz) 200.0 – 2,600.0 (m³/h)
H (50Hz) 8.0 – 230.0 (m)
Type of bearing Plain bearings
Borehole diameter (inc 16, 24, 18, 26, 20
Casing partition Radially split
Diffuser material (EN standard) JL 1030, CC480K
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage, high voltage
Connection to power supply < 6,6 kV, 3~
Type of first impeller Mixed flow
No. of impeller entries Single entry
Other impeller types Mixed flow
Impeller material (EN standard) CC480K, 1.4408, 1.4593
Type of coupling Direct
Type of lubrication Product lubrication
Discharge casing material (EN standard) CC480K, JL 1030
Max. permissible fluid temperature 50.0 (°C)
Maximum operating pressure PN 40
Pump set location Wet well
Shaft material (EN standard) 1.4021, 1.4462
Stage casing material (EN standard) CC480K, JL1030
Suction casing material (EN standard) JL1030, CC480K
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of connection Flange
Type of stage casing Stage casing with diffuser
Type of suction casing Annular casing
Casing material (EN standard) CC480K, 1.4408, JL1030, 1.4593
eClass assignment 36410000, 36410106, 36410100
Installation position Horizontal or vertical
Shaft seal type Mechanical seal, Shaft seal ring
Casing material Cast iron, Bronze, Stainless steel
Maximum discharge-side pressure 35.0 (bar)
Maximum drive rating 1000.0 (kW)
Type of installation Stationary
Maximum speed of rotation 1750.0 (1/min)