ISORIA 10

ISORIA 10/16


Main applications

  • Advanced treatment / 3.stage
  • Bio. treatment / 2.stage
  • Biofuels
  • Biogas
  • Breweries
  • Chemical industry
  • Cooling water and condensate
  • Desalination
  • Drainage
  • Drainage pump stations
  • Energy
  • Flood / stormwater holding tanks
  • Flood control
  • Flue gas desulphurization (FGD)
  • Flue gas desulphurization plants (FGD)
  • Flue gas desulphurization systems (FGD)
  • Food and beverages
  • General Processes
  • Groundwaterlevel (mining/buildings)
  • Industrial waste water
  • Industry engineering
  • Irrigation
  • Lake, Damwater extraction
  • Marine
  • Mech. treatment / 1.stage
  • Municipal waste water
  • Nuclear Island
  • Nuclear Power Stations
  • Pharmaceutical/Biotechnology
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Pressure boosting
  • Rawwater transport
  • Sea -& Riverwater Extraction
  • Sewage treatment plants
  • Snow guns
  • Special processes
  • Steel
  • Sugar
  • Surface drainage
  • Surface treatment
  • Systems
  • Tank cleaning
  • Turbine Island
  • Turbine oil supply
  • Waste water
  • Waste water transport
  • Water
  • Water Extraction
  • Water supply
  • Water treatment
  • Water works
  • Watertreatment
  • Well

Technical data

T max 200 °C
DN max 1,000
PN max 16

Design

Centered disc butterfly valve with elastomer liner. With lever, manual gearbox, pneumatic, electric or hydraulic actuator. Wafer type body (T1), semi-lug type body (T2), full-lug type body (T4), U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service with counterflange. EN, ASME, JIS connections possible.

Application

Shut-off and control duties in all industrial and energy applications.

Further technical information about ISORIA 10/16

Overview of technical data

T -10 – 200 (°C)
DN 40 – 1,000
PN 16
Actuator options available ex works Pneumatic actuator type ACTAIR, Hydraulic actuator type DYNACTO, Hydraulic actuator type ACTO, Pneumatic actuator to customer's choice, Electric actuator type ACTELEC, Pneumatic actuator type DYNACTAIR, Electric actuator to customer's choice
Body design Wafer body, Median rib body, Lug body, U-section body
Valve disc material 1.4408, CC333G, JS 1030+HALAR, JS1030+EBONITE, 1.4408 POL., 1.4573, JS 1030+EPOXY, JS 1030, 1.4593, 1.4401, 1.4401 POL., JS1030+HALAR, CC333G-GZ, 1.4539, JS1030+COATING
Dimension standard EN 558-1/20 ISO 5752/20
Liner material NBR-CB, VITON-VC, EPDM-XA, NBR-CC, EDPM-XA, EPDM-XW, EPDM-XC, HNBR-NH, CSM-Y, EPDM (KSB:XA), VITON-VA, EPDM-XV, SILICON-SK, NR-NB, ECO-EG, EDPM-XW, NBR-K
Valve disc/plug material Soft seat
Threaded-end design Wafer-type design, Flange design, Screwed flange design
Body material (EN standard) GP240GH+N, JL 1040, JS 1030
Main applications Energy, Industry and process engineering, Shipping / Shipbuilding, Building services, Waste water / sewage, Water, Oil / Gas, Mining / Dredge
Body material Nodular cast iron, Cast steel, Cast iron
PN min. 10