Etanorm SYT
Main applications
- Biofuels
- Breweries
- Building services
- Chemical industry
- Desalination
- Food and beverages
- Heating / ventilation / air-condition
- Industry engineering
- Irrigation
- Municipal waste water
- Pressure boosting
- Rawwater transport
- Steel
- Sugar
- Systems
- Waste water
- Water
- Water supply
- Water works
- Watertransport
- Watertreatment
Technical data
Q max
765.0 m³/h
H max
102.0 m
Design
Horizontal, long-coupled volute casing pump in back pull-out design with ratings and main dimensions to EN 733, single-stage, with replaceable casing wear rings. Design to ATEX.
Applications
Heat transfer systems (DIN 4754, VDI 3033) or hot water recirculation (DIN 4752).
Further technical information about Etanorm SYT
Overview of technical data
Q (50Hz) | 1.5 – 765.0 (m³/h) |
H (50Hz) | 2.0 – 102.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Explosion protection | IP55 |
Explosion protection | IP55 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL 1040 / A48CL35 |
Type of installation | Long-coupled |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 350.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN 16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4021 + QTHRC55 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Closed / Radial |
Type of connection | Flange |
Casing material (EN standard) | JS 1030 / A536 GR 60-40-18 |
eClass assignment | 36410000, 36410100, 36410101 |
Installation position | Horizontal |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering, Energy, Building services, Oil / Gas |
Casing material | Nodular cast iron |
Maximum discharge-side pressure | 16.0 (bar) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |