Etabloc SYT
Main applications
- Building services
- Cooling water and condensate
- Energy
- Heating / ventilation / air-condition
- Industry engineering
- Municipal waste water
- Power Stations > 100 MW
- Steel
- Waste water
- Water supply
Technical data
Q max
337.0 m³/h
H max
99.0 m
Design
Volute casing pump for horizontal or vertical installation, back pull-out design, single-stage, with ratings to EN 733, radially split volute casing, replaceable casing wear rings, volute casing with integrally cast pump feet, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, product-lubricated carbon plain bearing, grease-lubricated radial ball bearing in the motor housing, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system, ATEX-compliant version available.
Application
Heat transfer systems, hot water recirculation
Further technical information about Etabloc SYT
Overview of technical data
Q (50Hz) | 1.5 – 337.0 (m³/h) |
H (50Hz) | 2.0 – 99.0 (m) |
Type of bearing | Plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Explosion protection | IP55 |
Explosion protection | IP55 |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL 1040 / A48CL35 |
Type of installation | Close-coupled |
Type of coupling | Direct |
Type of lubrication | Product lubrication |
Max. permissible fluid temperature | 350.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN 16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4021 + QTHRC55 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Closed / Radial |
Type of connection | Flange |
UNSPSC classification | 4015150300 |
Casing material (EN standard) | JS 1030 / A536 GR 60-40-18 |
eClass assignment | 36410000, 36410100, 36410101 |
Installation position | Horizontal or vertical |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering, Energy, Building services, Oil / Gas |
Casing material | Nodular cast iron |
Maximum discharge-side pressure | 16.0 (bar) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |