Main applications

  • Building services
  • Drainage
  • Mech. treatment / 1.stage
  • Pressure Drainage
  • Sewage lifting units
  • Sewage treatment plants
  • Sludge treatment
  • Waste water
  • Waste water / sewage
  • Waste water lifting units
  • Waste water transport
  • Water supply
  • Water transport

Technical data

Q max 400.0 m³/h
H max 24.0 m


Vertical pump with Vortex impeller, with or without lower guide bearing bush and without sealing. Built in pumped fluid duc and no risk of obstruction.


Treatment plant, water with sand, waste water, oily water, sludge recirculation, cutting oil. wash water in spray-paint.

Further technical information about VT

Overview of technical data

Q (50Hz) 2.0 – 400.0 (m³/h)
H (50Hz) 2.0 – 24.0 (m)
Type of bearing Rolling element bearings
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230/400 V, 3~
Impeller material (EN standard) JL 1040
Type of lubrication Oil lubrication
Max. permissible fluid temperature 75.0 (°C)
Nozzle position End suction
Pump set location Dry installed
Suction characteristics Non-priming
Top plate Yes
Type of casing Volute casing
Type of impeller Open
Type of connection Screw-ended, flange
UNSPSC classification 4015150300
Casing material (EN standard) JL 1040
eClass assignment 36410101
Free passage 120.0 (mm)
Installation position Vertical
Shaft seal type Shaft seal ring
Main applications Industry and process engineering, Water, Waste water / sewage, Building services
Casing material Cast iron
Maximum discharge-side pressure 6.0 (bar)
Maximum drive rating 18.5 (kW)
Type of installation Stationary
Maximum speed of rotation 2900.0 (1/min)