Filtra N

Main applications

Building services
Swimming pools
Water supply

Technical data

Q max 36.0 m³/h

H max 21.0 m

Web shop Configurators

Documentation Contact KSB

Design

Single-stage self-priming centrifugal pump in close-coupled design.

Application

Pumping clean or slightly contaminated water, swimming pool water with a max. chlorine content of 0.3 %; ozonised swimming pool water with a max. salt content of 7 ‰.

Further technical information about Filtra N

Product Documentation
Technical data

Overview of technical data

Q (50Hz)	0.0 – 36.0 (m³/h)
H (50Hz)	3.0 – 21.0 (m)
Type of bearing	Ball bearings
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Drive voltage	Low voltage
Connection to power supply	400 V, 3~
Impeller material (EN standard)	NORYL
Type of installation	Close-coupled
Type of coupling	Direct, None
Type of lubrication	Product lubrication
Max. permissible fluid temperature	35.0 (°C)
Nozzle position	Variable
Maximum operating pressure	PN 2,5
Pump set location	Dry installed
Shaft material (EN standard)	CHROMSTAHL, 1.4404
Suction characteristics	Non-priming
Type of impeller	Closed
Type of connection	Thread
UNSPSC classification	4015150300
Casing material (EN standard)	PP
eClass assignment	36410101
Installation position	Horizontal
Shaft seal type	Mechanical seal
Main applications	Building services
Casing material	Plastics
Maximum discharge-side pressure	2.5 (bar)
Maximum drive rating	2.2 (kW)
Type of installation	Stationary
Maximum speed of rotation	2900.0 (1/min)

Back to product overview