CINCP / CINCN
Main applications
- Chemical industry
- Industry engineering
- Oil /Gas
- Petrochemical Industry
- Water
- Water supply
- Watertransport
Technical data
Q max
320.0 m³/h
H max
95.0 m
Design
Vertical immersion pump in cantilever design for wet or dry installation. Semi-open impeller, pump shaft without guide bearings, supported by ball bearings in the upper section. Supplied with discharge pipe extending above the baseplate (CINCP) or without discharge pipe (CINCN). ATEX-compliant version available.
Application
Chemical and petrochemical industries, raw materials extraction and waste water management.
Further technical information about CINCP / CINCN
Overview of technical data
Q (50Hz) | 0.7 – 320.0 (m³/h) |
H (50Hz) | 3.5 – 95.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 230/400 V, 3~ |
Explosion protection | ATEX (94/9/EC) |
Type of first impeller | Single entry |
Maximum submergence | 1585.0 (mm) |
Impeller material (EN standard) | CA6NM, CF8M, JL 1040 |
Type of coupling | Direct |
Type of lubrication | Grease / Oil lubrication |
Max. permissible fluid temperature | 100.0 (°C) |
Pump set location | Dry installed, floodable |
Shaft material (EN standard) | AISI-316L, F-114 |
Suction characteristics | Non-priming |
Top plate | Yes |
Type of casing | Volute casing |
Type of impeller | Open |
Casing material (EN standard) | CA6NM, CF8M, JL1040 |
Installation position | Vertical |
Shaft seal type | Shaft seal ring |
Main applications | Industry and process engineering, Water |
Maximum discharge-side pressure | 10.0 (bar) |
Maximum drive rating | 184.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |