KWP
Main applications
- Ash removal
- Bio. treatment / 2.stage
- Biofuels
- Breweries
- Chemical industry
- Cooling water and condensate
- Desalination
- Drainage
- Energy
- Flood / stormwater holding tanks
- Flood control
- Flue gas desulphurization (FGD)
- Flue gas desulphurization plants (FGD)
- Flue gas desulphurization systems (FGD)
- Food and beverages
- General Processes
- Industrial Process
- Industry engineering
- Mech. treatment / 1.stage
- Mineral Mining
- Mining
- Municipal waste water
- Oil /Gas
- Petrochemical Industry
- Pipelines and Tanks
- Power Stations < 100 MW
- Power Stations > 100 MW
- Process
- Rawwater transport
- Sewage treatment plants
- Slurry
- Special processes
- Steel
- Sugar
- Surface drainage
- Suspended solids treatment
- Tank cleaning
- Waste water
- Waste water transport
- Water
- Water treatment
- Watertransport
- Watertreatment
Technical data
Q max
15,000.0 m³/h
H max
140.0 m
Design
Horizontal radially split volute casing pump in back pull-out design, single-stage, single-entry, available with various impeller types: closed multi-channel impeller, open multi-vane impeller and free-flow impeller. ATEX-compliant version available.
Application
Paper industry, cellulose industry, sugar industry, food industry, power plants, chemical industry, petrochemical industry, flue gas desulphurisation, coal upgrading plants, industrial applications, waste water transport, seawater desalination / reverse osmosis
Further technical information about KWP
Overview of technical data
Q (50Hz) | 4.0 – 15,000.0 (m³/h) |
H (50Hz) | 1.0 – 140.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage, high voltage |
No. of impeller entries | Single entry |
Impeller material (EN standard) | CERAMIKPOLYSIC, ERN, NORICHROM, NORICLOR, NORIDUR 1.4593, NORIHARD |
Type of installation | Long-coupled |
Type of coupling | Jack shaft / Belt drive, Direct, Gear |
Type of lubrication | Oil lubrication |
Max. permissible fluid temperature | 280.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN10 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | C45+N |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Free flow impeller, Closed, Radial, Multi-vane impeller, Open |
Type of connection | Flange |
Casing material (EN standard) | CERAMIKPOLYSIC, JL1040, NORICLOR, NORICROM, NORIDUR 1.4593, NORIHARD |
eClass assignment | 36410101, 36410000, 36410100, 36410103 |
Free passage | 250.0 (mm) |
Installation position | Horizontal |
Shaft seal type | Mechanical seal, Gland packing |
Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges |
Casing material | Special cast material, Cast iron, Duplex steel |
Maximum discharge-side pressure | 10.0 (bar) |
Maximum drive rating | 1500.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |