PNW

PNW


Main applications

  • Flood / stormwater holding tanks
  • Flood control
  • Heat transfer, Cooling circuits
  • Industry engineering
  • Lake, Damwater extraction
  • Municipal waste water
  • Sea -& Riverwater Extraction
  • Sludge treatment
  • Special processes
  • Waste water
  • Water
  • Water Extraction
  • Watertransport

Technical data

Q max 9,000.0 m³/h
H max 10.0 m

Descripción

Bomba vertical de cuerpo tubular con impulsor axial, de una etapa con cojinetes de Residur libres de mantenimiento, brida de impulsión dispuesta encima o debajo del suelo.

Aplicaciones

Sistemas de drenaje y riego, estaciones de bombeo de aguas pluviales, bombeo de agua bruta y pura, sistemas de abastecimiento de agua, bombeoDatos de servicio a 50 Hzde agua de refrigeración.

Further technical information about PNW

Overview of technical data

Q (50Hz) 290.0 – 9,000.0 (m³/h)
H (50Hz) 0.5 – 10.0 (m)
Type of bearing Plain bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication Product lubrication
Max. permissible fluid temperature 60.0 (°C)
Maximum operating pressure PN 10
Pump set location Wet well
Suction characteristics Non-priming
Type of casing Tubular casing
Type of impeller Axial, Propeller
Type of connection Flange
eClass assignment 36410000, 36410106, 36410100
Free passage 170.0 (mm)
Installation position Vertical
Shaft seal type Gland packing
Main applications Waste water / sewage, Water
Casing material Ni-Resist, Chrome nickel steel, Carbon steel
Maximum drive rating 320.0 (kW)
Type of installation Stationary
Maximum speed of rotation 1500.0 (1/min)