Etaprime L

Etaprime L


Main applications

  • Breweries
  • Food and beverages
  • Industrial waste water
  • Industry engineering
  • Municipal waste water
  • Suspended solids treatment
  • Waste water

Design type

Centrifugal pumps with shaft seal

Technical data

Q max 180.0 m³/h
H max 105.0 m

Design

Horizontal, long-coupled, self-priming volute casing pump in back pull-out design, single-stage, with open multi-vane impeller. Design to ATEX.

Applications

Handling of pure, contaminated or aggressive liquids not containing abrasive substances and / or solids.

Further technical information about Etaprime L

Overview of technical data

Q (50Hz) 4.0 – 180.0 (m³/h)
H (50Hz) 5.0 – 105.0 (m)
Type of bearing Ball bearings
Casing partition Radially split
Drive IEC standardized motor, electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) 1.4408, JL 1040
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication Grease / Oil lubrication
Max. permissible fluid temperature 90.0 (°C)
Guaranteed to be silicon-free Yes
Nozzle position End suction
Maximum operating pressure PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4462, C45+N, 1.4571
Suction characteristics Self-priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Multi-vane impeller, Open
Type of connection Screw-ended, flange
Casing material (EN standard) 1.4408, JL 1040
Free passage 10.0 (mm)
Installation position Horizontal
Shaft seal type Mechanical seal
Main applications Building services, Water, Industry and process engineering, Waste water / sewage
Casing material Cast stainless steel, Cast iron
Maximum discharge-side pressure 10.0 (bar)
Maximum drive rating 37.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)