ES000778-Pumpstation-CK-800

Pumpstation CK 800


Main applications

  • Building services
  • Drainage
  • Pressure Drainage
  • Sewage lifting units
  • Waste water
  • Waste water lifting units

Technical data

Q max 22.0 m³/h
H max 49.0 m

Design

Ready-to-connect package single-pump or dual-pump station with PE-LLD (polyethylene) collecting tank for underground installation. Equipped with either one or two (explosion-proof or non-explosionproof) Amarex N S or (non-explosionproof) Ama-Porter submersible motor pumps with cutter. Collecting tank design to DIN 1986-100 and EN 752/EN 476/EN 1671. Automated with LevelControl.

Applications

Redevelopment of premises, sewage disposal in various sectors, joint sewage disposal for several residential units, pumped drainage.

Further technical information about Pumpstation CK 800

Overview of technical data

Q (50Hz) 0.0 – 22.0 (m³/h)
H (50Hz) 0.0 – 49.0 (m)
Type of bearing Ball bearings
Cutter Yes
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection MIT / OHNE
Impeller material (EN standard) JL1040
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40.0 (°C)
Shaft material (EN standard) 1.4021
Type of casing Volute casing
Type of impeller Cutter
Casing material (EN standard) PUMPE JL1040
eClass assignment 00000000
Free passage 7.0 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Water, Waste water / sewage, Building services
Casing material Plastics
Maximum drive rating 4.2 (kW)
Type of installation Stationary, Under ground
Maximum speed of rotation 2900.0 (1/min)