Ama-Drainer 80 / 100
Main applications
- Building services
- Drainage
- Flood control
- Groundwaterlevel (mining/buildings)
- Pressure Drainage
- Sea -& Riverwater Extraction
- Systems
- Waste water
- Waste water / sewage
- Waste water lifting units
- Water
- Water Extraction
- Watertransport
Technical data
Q max
130.0 m³/h
H max
26.0 m
Design
Vertical single-stage fully floodable submersible motor pump in close-coupled design, IP68, with or without level control, max. immersion depth: 10 m.
Application
Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.
Further technical information about Ama-Drainer 80 / 100
Overview of technical data
Q (50Hz) | 0.0 – 130.0 (m³/h) |
H (50Hz) | 4.5 – 26.0 (m) |
Type of bearing | Ball bearings |
Drive | Electric motor |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 400 V, 3~ |
Explosion protection | OHNE |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL1040 |
Type of coupling | Direct |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 50.0 (°C) |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021 |
Suction characteristics | Self-priming |
Type of impeller | Free flow impeller, Open |
Type of connection | Thread |
UNSPSC classification | 4015150300 |
Casing material (EN standard) | JL1040 |
eClass assignment | 36410101, 36410100, 36410000 |
Free passage | 12.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Waste water / sewage, Building services, Water |
Casing material | Cast iron |
Maximum drive rating | 7.5 (kW) |
Type of installation | Transportable, Stationary |
Maximum speed of rotation | 2800.0 (1/min) |