ES000575-Etanorm-PumpDrive

Etanorm PumpDrive


Main applications

  • Biofuels
  • Breweries
  • Building services
  • Chemical industry
  • Cooling water and condensate
  • Desalination
  • Energy
  • Food and beverages
  • HVAC
  • Heat transfer, Cooling circuits
  • Heating / ventilation / air-condition
  • Industrial waste water
  • Industry engineering
  • Irrigation
  • Municipal waste water
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Pressure boosting
  • Rawwater transport
  • Special processes
  • Steel
  • Suspended solids treatment
  • Systems
  • Waste water
  • Water
  • Water supply
  • Water transport
  • Water works
  • Watertransport
  • Watertreatment

Design type

Close-coupled design

Technical data

Q max 602.0 m³/h
H max 102.0 m

Design

Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4 to IEC/CD 60034-30 Ed. 2.0 (05-2011), for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011).

Application

Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling water circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems

Further technical information about Etanorm PumpDrive

Overview of technical data

Q (50Hz) 1.5 – 602.0 (m³/h)
H (50Hz) 3.0 – 102.0 (m)
Type of bearing Ball bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection IP 55
No. of impeller entries Single entry
Impeller material (EN standard) 1.4408, CC 480 K-GS, GJL-250, GJS-400-18-LT, JL 1040, JS 1025
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 110.0 (°C)
Nozzle position End suction
Maximum operating pressure 16 BAR
Pull-out design Yes
Pump set location Dry installed
Standard DIN, DIN / ANSI
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Closed, Radial, Multi-vane impeller, Closed / Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) 014408, 01L-250, 01S-400-18-LT, 1.4408, CC 480 K-GS, GJL-250, GJS-400-18-LT, JL 1040, JS 1025
eClass assignment 00000000, 36410000, 36410100, 36410101
Installation position Horizontal
Shaft seal type Gland packing, Mechanical seal
Main applications Industry and process engineering, Water, Waste water / sewage, Energy, Building services, Oil / Gas
Casing material Cast iron, Chrome nickel steel, Cast steel, Cast stainless steel, Nodular cast iron, Bronze
Maximum discharge-side pressure 16.0 (bar)
Type of installation Stationary
Maximum speed of rotation 4400.0 (1/min)