ES000909-B-Pumps

B-Pumps


Main applications

  • Building services
  • Cooling water and condensate
  • Energy
  • Groundwaterlevel (mining/buildings)
  • Irrigation
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Water
  • Water Extraction
  • Water supply
  • Water transport

Technical data

Q max 2,600.0 m³/h
H max 160.0 m

Design

Main pump parts are the Pump Bowl Assembly, Column Pipe Assembly, and Discharge head assembly. Bowl assembly consists of single or multistage radially split, interchangeable intermediate bowls. Column Pipe Assembly consists of interchangeable lengths of the column pipes and variable setting depth. Discharge head assembly consists of discharge head with packed stuffing zone/mechanical seal and thrust bearing arrangement (in case of solid shaft drive only).

Applications

These pumps are suitable for water supply schemes, irrigation schemes, lowering of ground water and dewatering of mines and construction sites. Deep well turbines are particularly suitable for narrow bore holes. Minimum borehole sizes range from 200mm to 675mm.

Further technical information about B-Pumps

Overview of technical data

Q (50Hz) 10.0 – 2,600.0 (m³/h)
H (50Hz) 1.7 – 160.0 (m)
Barrel casing Yes
Type of bearing Plain bearings
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Type of first impeller Single entry
Impeller material (EN standard) 1.4408, 1.4517, GG-25, NI-RESIST D2
Type of installation In-line
Type of coupling Direct
Type of lubrication Product lubrication
Max. permissible fluid temperature 105.0 (°C)
Pump set location Dry installed, Wet well
Shaft material (EN standard) 1.4021, 1.4462, 1.4571/AISI 316, C45N
Standard EN, EN/ANSI
Suitable for drinking water Yes
Casing material (EN standard) BZ, D2, DUPLEX, GG, NI-RESIST D2
Installation position Vertical
Shaft seal type Gland packing, Mechanical seal
Main applications Water
Casing material Cast iron, Cast stainless steel, Cast duplex steel, Ni-Resist
Maximum discharge-side pressure 16.0 (bar)
Type of installation Stationary
Maximum speed of rotation 3500.0 (M/M)