[---skiplinks_navigation---] [---skiplinks_content---] [---skiplinks_search---]
Sewatec

Sewatec

Main applications

  • Bio. treatment / 2.stage
  • Biogas
  • Chemical industry
  • Industrial waste water
  • Industry engineering
  • Mech. treatment / 1.stage
  • Municipal waste water
  • Sewage treatment plants
  • Suspended solids treatment
  • Waste water
  • Waste water transport
  • Water

Technical data

Q max 10,000.0 m³/h
H max 115.0 m
Documentation Contact KSB

Design

Volute casing pump for horizontal or vertical installation, with free-flow (F), single-channel (E), multi-channel (K) or diagonal single-vane impeller (D), discharge flange to DIN and ANSI standards. ATEX-compliant version available.

Application

Waste water transport, waste water disposal, waste water management, transport of contaminated surface water, sludge treatment

Further technical information about Sewatec

Overview of technical data

Q (50Hz) 10.0 – 10,000.0 (m³/h)
H (50Hz) 2.0 – 115.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage, high voltage
No. of impeller entries Single entry
Impeller material (EN standard) 1.4517, JL 1040, JN 3029
Type of installation Long-coupled
Type of coupling Jack shaft / Belt drive, Direct, Float switch, Bubbler system
Type of lubrication Grease lubrication
Max. permissible fluid temperature 70.0 (°C)
Nozzle position End suction
Maximum operating pressure PN16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4021, 1.4462
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Single-channel impeller, Free flow impeller, Closed, Radial, Multi-vane impeller, Open
Type of connection Flange
Casing material (EN standard) JL 1040
eClass assignment 36410101, 36410103
Free passage 280.0 (mm)
Installation position Horizontal or vertical
Shaft seal type Mechanical seal, Gland packing
Main applications Industry and process engineering, Waste water / sewage
Casing material Cast iron
Maximum discharge-side pressure 10.0 (bar)
Maximum drive rating 710.0 (kW)
Type of installation Stationary
Maximum speed of rotation 2900.0 (1/min)
Back to product overview