ES000925-Etaline-L

Etaline L


Main applications

  • Biogas
  • Breweries
  • Building services
  • Food and beverages
  • HVAC
  • Heat transfer, Cooling circuits
  • Heating / ventilation / air-condition
  • Industry engineering
  • Irrigation
  • Special processes
  • Steam and hot water, district heating
  • Steel
  • Waste water
  • Water
  • Water supply
  • Watertransport

Design type

Glanded in-line pump

Technical data

Q max 95.0 m³/h
H max 21.0 m

Design

Single-stage close-coupled in-line volute casing pump with common motor/pump shaft and uncooled mechanical seal.

Application

Heating systems, air-conditioning systems, cooling circuits, water supply systems (not approved for drinking water according to the German Environment Agency), service water supply systems, industrial recirculation systems, swimming pools

Further technical information about Etaline L

Overview of technical data

Q (50Hz) 1.0 – 95.0 (m³/h)
H (50Hz) 1.0 – 21.0 (m)
Type of bearing Ball bearings
Casing partition Radially split
Controlled variable 00
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230/400 V, 3~
Impeller material (EN standard) BRONZE CC491K, EN-GJL-150, PSU-GF30
Type of installation In-line
Type of coupling Direct
Type of lubrication Grease / Product lubrication
Max. permissible fluid temperature 120.0 (°C)
Nozzle position In-line
Maximum operating pressure PN 10
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) STAINLESS STEEL
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Screw-ended, flange
Casing material (EN standard) BRONZE CC491K, EN-GJL-150, EN-GJL-200
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering, Building services
Casing material Cast iron, Bronze
Type of installation Stationary
Maximum speed of rotation 2900.0 (1/min)