Main applications

  • Energy
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Turbine oil supply

Technical data

Q max 190.0 m³/h
H max 150.0 m


Vertical, radially split shaft-driven sump pump radial impeller, single-flow, single-stage.


Used in the chemical and petrochemical industry as well as in refineries for handling chemically aggressive media with only low solids content.

Further technical information about CPT

Overview of technical data

Q (50Hz) 2.0 – 190.0 (m³/h)
H (50Hz) 2.0 – 150.0 (m)
Type of bearing Ball and plain bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Heatable Yes
Impeller material (EN standard) 1.4408, JL 1040
Type of lubrication Oil lubrication
Max. permissible fluid temperature 300.0 (°C)
Nozzle position End suction
Pump set location Dry installed
Shaft material (EN standard) C 45, 1.4571
Type of casing Volute casing
Type of impeller Radial
Type of connection Flange
UNSPSC classification 4015150300
Casing material (EN standard) JL 1040, 1.4408
eClass assignment 36410101
Installation position Vertical
Shaft seal type Mechanical seal, Gland packing
Main applications Industry and process engineering, Oil / Gas
Casing material Stainless steel, Cast iron
Maximum discharge-side pressure 16.0 (bar)
Type of installation Stationary
Maximum speed of rotation 3500