RWCP / RWCN
Main applications
- Chemical industry
- Drainage
- Flood / stormwater holding tanks
- Industrial waste water
- Industry engineering
- Marine
- Oil /Gas
- Petrochemical Industry
- Waste water
- Waste water transport
- Water supply
Technical data
Q max
800.0 m³/h
H max
60.0 m
Design
Process pump with free-flow impeller, semi-open or two-channel or three-channel impeller. Shaft sealed by mechanical seal or gland packing in accordance with various API pipework plans. Oil-lubricated bearings. ATEX-compliant version available.
Application
Refineries, chemical and petrochemical industries, steel works, descaling units, raw materials extraction, waste water management.
Further technical information about RWCP / RWCN
Overview of technical data
Q (50Hz) | 2.0 – 800.0 (m³/h) |
H (50Hz) | 0.9 – 60.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 230/400 V, 3~ |
Explosion protection | ATEX (94/9/EC) |
Maximum submergence | 5785.0 (mm) |
Impeller material (EN standard) | CA6NM, CF8M, JL1040 |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 100.0 (°C) |
Pump set location | Dry installed, floodable |
Shaft material (EN standard) | AISI-316L, F-114 |
Suction characteristics | Non-priming |
Top plate | Yes |
Type of casing | Volute casing |
Type of impeller | Open, Free flow impeller, Three-channel impeller |
Casing material (EN standard) | CF8M, JL1040 |
Installation position | Vertical |
Shaft seal type | Gland packing, Shaft seal ring, Mechanical seal |
Main applications | Industry and process engineering, Waste water / sewage, Oil / Gas |
Maximum discharge-side pressure | 16.0 (bar) |
Maximum drive rating | 300.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |