Estigia
Main applications
- Auxiliary Systems
- Breweries
- Chemical industry
- Cooling water and condensate
- Drainage
- Energy
- Flood / stormwater holding tanks
- Food and beverages
- General Processes
- Heat transfer, Cooling circuits
- Industrial waste water
- Industry engineering
- Nuclear Power Stations
- Oil /Gas
- Petrochemical Industry
- Power Stations < 100 MW
- Power Stations > 100 MW
- Special processes
- Steel
- Sugar
- Surface treatment
- Turbine oil supply
- Waste water
- Water
- Water treatment
- Water works
- Watertreatment
Technical data
Q max
1,160.0 m³/h
H max
110.0 m
Design
Vertical immersion pump for wet installation with closed impeller, to DIN EN ISO 5199 (with comments). Supplied with discharge pipe extending above the cover plate, DN according to nominal flow rate. Sealing by lip seal, single or double cartridge mechanical seal. ATEX-compliant version available.
Application
Pumping chemically aggressive, slightly contaminated or solids-laden fluids in the chemical and petrochemical industries.
Further technical information about Estigia
Overview of technical data
Q (50Hz) | 0.0 – 1,160.0 (m³/h) |
H (50Hz) | 0.0 – 110.0 (m) |
Casing material (EN standard) | DUPLEX STAINLESS STEEL 1.4593, GREY CAST IRON JL1040 / A48CL3, STAINLESS STEEL 1.4408 |
Installation position | Vertical |
Shaft seal type | Shaft seal ring, Mechanical seal |
Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Oil / Gas |
Casing material | Cast iron, Duplex steel, Cast stainless steel |
Type of installation | Stationary |