Amacan S

Main applications

  • Cooling water and condensate
  • Energy
  • Flood control
  • Industrial waste water
  • Irrigation
  • Lake, Damwater extraction
  • Mining
  • Municipal waste water
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Process
  • Sea -& Riverwater Extraction
  • Sewage treatment plants
  • Waste water
  • Water
  • Water Extraction
  • Watertransport
  • Well

Technical data

Q max 21,600.0 m³/h
H max 55.0 m


Wet-installed submersible motor pump for installation in discharge tubes, with mixed flow impeller, single-stage. ATEX-compliant version available.


Pumping water not containing stringy material in irrigation and drainage pumping stations, general water supply systems, water pollution and flood control.

Further technical information about Amacan S

Overview of technical data

Q (50Hz) 500.0 – 21,600.0 (m³/h)
H (50Hz) 2.5 – 55.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Diffuser material (EN standard) 1.4057, 1.4021
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400/690 V, 3~
No. of impeller entries Single entry
Impeller material (EN standard) CC480K-GS, CC333G-GS
Type of installation In-line
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40.0 (°C)
Nozzle position In-line
Pump set location Wet well
Shaft material (EN standard) 1.4021, 1.4057
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of impeller Mixed flow impeller
Casing material (EN standard) JL 1040
eClass assignment 36410000, 36410106, 36410100
Free passage 160.0 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications 00, Wasser, Energie, Bergbau / Baggerbetrieb
Casing material Cast iron
Maximum drive rating 1100.0 (kW)
Type of installation Stationary
Maximum speed of rotation 1800.0 (1/min)