UPA 150C

Main applications

  • Breweries
  • Fire fighting and sprinkler systems
  • Food and beverages
  • General Processes
  • Groundwaterlevel (mining/buildings)
  • Industry engineering
  • Irrigation
  • Lake, Damwater extraction
  • Lowering of the groundwater
  • Mining
  • Oil /Gas
  • Pressure boosting, fire fighting systems
  • Process
  • Storage in Caverns
  • Surface treatment
  • Water
  • Water Extraction
  • Water supply
  • Water transport
  • Watertransport

Technical data

Q max 85.0 m³/h
H max 320.0 m


All-stainless steel single-stage or multistage centrifugal pump in ring-section design for well diameters of 150 mm (6 inches) and above.


Spray irrigation systems, irrigation systems, drawdown of groundwater levels, domestic water supply, fountains, heat pump systems, water supply systems

Further technical information about UPA 150C

Overview of technical data

Q (50Hz) 8.0 – 85.0 (m³/h)
H (50Hz) 8.0 – 320.0 (m)
Barrel casing Yes
Type of bearing Plain bearings
Borehole diameter (inc 06
Casing partition Radially split
Diffuser material (EN standard) PPO GF30
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply < 1000 V, 3~
Type of first impeller Radial / Mixed flow
No. of impeller entries Single entry
Other impeller types Radial / Mixed flow
Impeller material (EN standard) PPO GF30
Type of lubrication Grease / Product lubrication
Max. permissible fluid temperature 50.0 (°C)
Maximum operating pressure PN 40
Shaft material (EN standard) 1.4028, 1.4462
Stage casing material (EN standard) PPO GF30
Suction casing material (EN standard) CC 480K, CUSN10, GJL 250, JL 1040
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of connection Screw-ended, flange
Type of stage casing Stage casing with diffuser
Type of suction casing Annular casing
Casing material (EN standard) 1.4301, 1.4404, 1.4571, CC480K, JL1040
eClass assignment 36410000, 36410100, 36410101, 36410106
Installation position Horizontal or vertical
Shaft seal type Shaft seal ring, Mechanical seal
Casing material Cast iron, Chrome nickel steel, Stainless steel, Bronze, Chrome steel
Maximum discharge-side pressure 36.0 (bar)
Maximum drive rating 36.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)