Main applications

  • Energy
  • Groundwaterlevel (mining/buildings)
  • Industry engineering
  • Irrigation
  • Lake, Damwater extraction
  • Mining
  • Power Stations < 100 MW
  • Process
  • Water
  • Water Extraction
  • Water treatment
  • Watertransport
  • Well

Technical data

Q max 5,000.0 m³/h
H max 1,500.0 m

Single- or multistage centrifugal pumps in ring-section design, single entry; for vertical and - depending on the number of stages - horizontal installation; radial or mixed flow hydraulic systems available with reduced impeller diameters; driven by asynchronous motor or high-efficiency, synchronous submersible motor; suction casing fitted between pump and motor, suction casing equipped with strainer to protect the pump from coarse particles in the fluid handled. Pumps with check valve or connection branch on option.
Handling clean and slightly contaminated water, irrigation and drainage, spray irrigation, industrial and municipal water supply,
drawdown and maintenance of groundwater levels, fire-fighting, drinking water, raw and service water supply, pressure boosting
Type Series
UPAchrom 100, UPA 150C, UPA 200 - UPA 850; UPA D, UPA S 200.

Further technical information about UPA

Overview of technical data

Q (50Hz) 1.0 – 5,000.0 (m³/h)
H (50Hz) 10.0 – 1,500.0 (m)
Type of bearing Plain bearings
Borehole diameter (inc 06, 08, 10, 12, 14
Diffuser material (EN standard) GJS-400, CUAL10FE5NI5, PPO GF30, CUSN10, GJL-200
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage, high voltage
Connection to power supply 230V, 400V, 500V, 690 V, 3~
No. of impeller entries Single entry
Other impeller types Radial / Mixed flow
Impeller material (EN standard) 1.4408, 1.4517, CC480K, PPO GF30
Type of lubrication Product lubrication
Max. permissible fluid temperature 50.0 (°C)
Pump set location Wet well
Shaft material (EN standard) 1.4462, 1.4021
Stage casing material (EN standard) 1.4408, 1.4517, CC333G, CC480K, GJL-200, GJS-400, JS 1030
Suction casing material (EN standard) GJS-400, GJL-200, CUAL10FE5NI5, CUSN10, JS 1030, JL1030, CC480K
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of connection Screw-ended, flange
Type of stage casing Stage casing with diffuser
Type of suction casing Annular casing
UNSPSC classification 4015150300
Casing material (EN standard) 1.4408, 1.4593, CC333G, CC480K, CUAL10FE5NI5, CUSN 10, GJL-200, GJS-400, JL 1030, JS1030
eClass assignment 36410000, 00000000, 36410106, 36410100
Installation position Horizontal or vertical
Shaft seal type Mechanical seal, Shaft seal ring
Casing material Nodular cast iron, Bronze
Maximum discharge-side pressure 57.0 (bar)
Maximum drive rating 380.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)