WKTR

Main applications

Energy
Nuclear Power Stations
Turbine Island

Technical data

Q max 400.0 m³/h

H max 500.0 m

Design

Vertical can-type ring-section pump. TypeÂ VS6 to APIÂ 610 and DINÂ ISOÂ 13709, multistage, first-stage impeller designed as suction impeller, radial impellers. ATEX-compliant version available.

Application

Pumping condensate and other NPSH-critical products in industrial plants, particularly in refineries and petrochemical plants.

Overview of technical data

Q (50Hz)	0.0 – 400.0 (m³/h)
H (50Hz)	0.0 – 500.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Diffuser material (EN standard)	CHROMSTAHL, GUSSEISEN
Drive	Electric motor
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage, high voltage
Type of first impeller	Closed / Radial
Other impeller types	Closed / Radial
Maximum submergence	1585.0 (mm)
Impeller material (EN standard)	GUSSEISEN, STAHLGUSS
Type of coupling	Direct
Type of lubrication	Oil / Product lubrication
Discharge casing material (EN standard)	GRAUGUSS, STAHLGUSS
Pump set location	Dry installed
Shaft material (EN standard)	CHROMSTAHL, STAHLGUSS
Top plate	Yes
Type of impeller	Closed, Radial
Installation position	Vertical
Shaft seal type	Gland packing, Mechanical seal
Main applications	Oil / Gas
Casing material	Carbon steel
Maximum discharge-side pressure	51.0 (bar)
Type of installation	Stationary
Maximum speed of rotation	3600.0 (1/min)

Back to product overview