Main applications

  • Energy
  • General Processes
  • Industry engineering
  • Special processes

Technical data

Q max 250.0 m³/h
H max 100.0 m


Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733, or in in-line design.


Pumping aggressive, flammable, toxic, volatile or valuable liquids in the chemical and petrochemical industries, in environmental engineering and industrial applications.

Further technical information about Etaseco

Overview of technical data

Q (50Hz) 3.0 – 250.0 (m³/h)
H (50Hz) 9.0 – 100.0 (m)
Type of bearing Plain bearings
Casing partition Radially split
Drive IEC standardized motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 220/400/690 V, 3~
No. of impeller entries Single entry
Impeller material (EN standard) JL1040, JS1025
Type of installation Close-coupled
Type of coupling Direct
Type of lubrication Product lubrication
Max. permissible fluid temperature 140.0 (°C)
Nozzle position End suction
Maximum operating pressure PN 16
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4021
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Multi-vane impeller, Closed, Closed / Radial, Radial
Type of connection Flange
Casing material (EN standard) JS1025, JL1040
eClass assignment 36410100, 36410101, 36410000
Installation position Horizontal or vertical
Shaft seal type Canned motor pump
Main applications Industry and process engineering
Casing material Cast iron, Nodular cast iron
Maximum discharge-side pressure 16.0 (bar)
Maximum drive rating 18.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)