Etaseco I
Main applications
- Energy
- General Processes
- Industry engineering
- Special processes
Technical data
Q max
180.0 m³/h
H max
100.0 m
Design
Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733.
Application
Pumping aggressive, flammable, toxic, volatile or valuable liquids in the chemical and petrochemical industries, in environmental engineering and industrial applications.
Further technical information about Etaseco I
Overview of technical data
Q (50Hz) | 3.0 – 180.0 (m³/h) |
H (50Hz) | 9.0 – 100.0 (m) |
Type of bearing | Plain bearings |
Casing partition | Radially split |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 220/400/690 V, 3~ |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL1040, JS1025 |
Type of installation | In-line |
Type of coupling | None, Direct |
Type of lubrication | Product lubrication |
Max. permissible fluid temperature | 140.0 (°C) |
Nozzle position | In-line |
Maximum operating pressure | PN 16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4021 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Closed, Multi-vane impeller, Closed / Radial, Radial |
Type of connection | Flange |
Casing material (EN standard) | JL1040, JS1025 |
eClass assignment | 36410100, 36410101, 36410000 |
Installation position | Horizontal or vertical |
Shaft seal type | Canned motor pump |
Main applications | Industry and process engineering |
Casing material | Cast iron, Nodular cast iron |
Maximum discharge-side pressure | 16.0 (bar) |
Maximum drive rating | 22.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |