![LCC-R]([{"name":"portrait_ratio1x1","ratioWidth":1,"ratioHeight":1,"linksForWidth":{"97":"/resource/image/1522/portrait_ratio1x1/97/97/c65106cb96033848056476646ce2ea7b/ZO/es000218-lcc-r.png","110":"/resource/image/1522/portrait_ratio1x1/110/110/c65106cb96033848056476646ce2ea7b/NA/es000218-lcc-r.png","152":"/resource/image/1522/portrait_ratio1x1/152/152/c65106cb96033848056476646ce2ea7b/ca/es000218-lcc-r.png","176":"/resource/image/1522/portrait_ratio1x1/176/176/c65106cb96033848056476646ce2ea7b/vE/es000218-lcc-r.png","207":"/resource/image/1522/portrait_ratio1x1/207/207/c65106cb96033848056476646ce2ea7b/aj/es000218-lcc-r.png","290":"/resource/image/1522/portrait_ratio1x1/290/290/c65106cb96033848056476646ce2ea7b/lp/es000218-lcc-r.png","345":"/resource/image/1522/portrait_ratio1x1/345/345/c65106cb96033848056476646ce2ea7b/DC/es000218-lcc-r.png","555":"/resource/image/1522/portrait_ratio1x1/555/555/c65106cb96033848056476646ce2ea7b/TF/es000218-lcc-r.png"}},{"name":"landscape_ratio4x3","ratioWidth":4,"ratioHeight":3,"linksForWidth":{"320":"/resource/image/1522/landscape_ratio4x3/320/240/838d561b95ea2209959527a88518f2d8/aA/es000218-lcc-r.png","375":"/resource/image/1522/landscape_ratio4x3/375/281/838d561b95ea2209959527a88518f2d8/cH/es000218-lcc-r.png","414":"/resource/image/1522/landscape_ratio4x3/414/310/838d561b95ea2209959527a88518f2d8/Ia/es000218-lcc-r.png","500":"/resource/image/1522/landscape_ratio4x3/500/375/838d561b95ea2209959527a88518f2d8/Jd/es000218-lcc-r.png","768":"/resource/image/1522/landscape_ratio4x3/768/576/838d561b95ea2209959527a88518f2d8/gk/es000218-lcc-r.png","1000":"/resource/image/1522/landscape_ratio4x3/1000/750/838d561b95ea2209959527a88518f2d8/ne/es000218-lcc-r.png","1200":"/resource/image/1522/landscape_ratio4x3/1200/900/838d561b95ea2209959527a88518f2d8/Kx/es000218-lcc-r.png"}}] "LCC-R (© KSB AG)")
LCC-R
Main applications
- Ash removal
- Hard Rock mining
- Industrial Process
- Mineral Mining
- Mining
- Slurry
Technical data
Q max
2,455.0 m³/h
H max
50.0 m
Design
Interchangeable rubber-lined or part-metal design allows adaptation of existing pumps to new applications by simply exchanging the pump wet end.
Application
The pumps are suitable for moderate heads, fine particles and highly corrosive slurries.
Further technical information about LCC-R
Overview of technical data
| Q (50Hz) | 25.0 – 2,455.0 (m³/h) |
| H (50Hz) | 5.0 – 50.0 (m) |
| Type of bearing | Rolling element bearings |
| Type of drive | Electric motor, turbine, I.C. engine |
| Type of coupling | Direct, Gear, None, Variable speed coupling, Jack shaft / Belt drive, Float switch, Bubbler system |
| Type of lubrication | Grease / Oil lubrication |
| Pump set location | Dry installed, Wet well, Dry installed, floodable |
| Free passage | 107.0 (mm) |
| Shaft seal type | Gland packing, Mechanical seal, Hydrodynamic seal |
| Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges, Shipping / Shipbuilding |
| Type of installation | Transportable, Stationary |