Multitec A B C D

Main applications

  • Desalination
  • Energy
  • General Processes
  • Heat transfer, Cooling circuits
  • Industry engineering
  • Irrigation
  • Power Stations < 100 MW
  • Power Stations > 100 MW
  • Pressure boosting
  • Rawwater transport
  • Snow guns
  • Special processes
  • Steam circuits
  • Systems
  • Water
  • Water supply
  • Water works
  • Watertransport
  • Watertreatment

Technical data

Q max 1,500.0 m³/h
H max 1,000.0 m


Multistage horizontal or vertical centrifugal pump in ring-section design, long-coupled or close-coupled, with axial or radial suction nozzle, cast radial impellers and motor-mounted variable speed system. ATEX-compliant version available.


Water supply, drinking water supply, industry, pressure boosting, irrigation, power stations, heating systems, filtering systems, fire-fighting systems, reverse osmosis systems, snow-making systems and washing plants.

Further technical information about Multitec A B C D

Overview of technical data

Q (50Hz) 4.0 – 1,500.0 (m³/h)
H (50Hz) 20.0 – 1,000.0 (m)
Type of bearing Rolling element and plain bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor, turbine, I.C. engine
Drive voltage Low voltage
Type of first impeller Closed / Radial
No. of impeller entries Single entry
Impeller material (EN standard) 1.4408, CC480K-GS, GJL 250
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication grease-/oil- and product lubrication
Discharge casing material (EN standard) 1.4317, 1.4408, GJL 250, GJS 400, GP240GH+N
Max. permissible fluid temperature 200.0 (°C)
Nozzle position Variable
Maximum operating pressure PN 16, 25, 40, 63, 80, 100
Pump set location Dry installed
Stage casing material (EN standard) 1.4317, 1.4404, 1.4408, GJL 250, GJS 400, GP240GH+N, S355J2H
Suction casing material (EN standard) 1.4317, 1.4404, 1.4408, GJL 250, GJS 400, GP240GH+N
Type of connection Flange
Type of discharge casing Annular casing
Type of stage casing Stage casing with diffuser
Type of suction casing Annular casing
Casing material (EN standard) 1.4317, 1.4408, GJL 250, GJS 400, GP240GH+N, S355J2H
Installation position Horizontal
Shaft seal type Gland packing, Mechanical seal
Main applications Industry and process engineering, Water, Building services
Casing material Cast iron, Cast steel, Cast stainless steel, Nodular cast iron
Maximum discharge-side pressure 100.0 (bar)
Maximum drive rating 1500.0 (kW)
Type of installation Stationary
Maximum speed of rotation 4000.0 (1/min)