Pumpstation CK 1000

Main applications

  • Building services
  • Drainage
  • Pressure Drainage
  • Sewage lifting units
  • Sewage treatment plants
  • Waste water
  • Waste water lifting units

Technical data

Q max 50.0 m³/h
H max 39.0 m


Single-pump or dual-pump station as ready-to-connect package system, with PE-LLD (polyethylene) collecting tank for buried installation. Equipped with either one or two submersible waste water pumps of type Amarex N (explosion-proof or non-explosion-proof) or Ama-Porter (non-explosion-proof). Tank design to DIN 1986-100 and EN 752/EN 476.


Drainage of buildings and premises, waste water disposal, premises renovation, joint sewage disposal for multiple residential units, pumped drainage

Further technical information about Pumpstation CK 1000

Overview of technical data

Q (50Hz) 0.0 – 50.0 (m³/h)
H (50Hz) 0.0 – 39.0 (m)
Type of bearing Ball bearings
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection MIT / OHNE
Impeller material (EN standard) JL1040
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40.0 (°C)
Number of pumps 2
Shaft material (EN standard) 1.4021
Type of casing Volute casing
Type of impeller Free flow impeller
Type of connection clamp coupling
UNSPSC classification 4015150300
Casing material (EN standard) PUMPE JL1040
eClass assignment 36410000, 36410100, 36410107
Free passage 60.0 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Building services, Water, Waste water / sewage
Maximum drive rating 4.2 (kW)
Type of installation Stationary, Under ground
Maximum speed of rotation 2900.0 (1/min)