Amacan K

Main applications

  • Advanced treatment / 3.stage
  • Bio. treatment / 2.stage
  • Drainage pump stations
  • Flood / stormwater holding tanks
  • Industrial waste water
  • Mech. treatment / 1.stage
  • Mining
  • Municipal waste water
  • Process
  • Sewage treatment plants
  • Surface drainage
  • Suspended solids treatment
  • Waste water
  • Waste water transport

Technical data

Q max 7,200.0 m³/h
H max 30.0 m


Wet-installed submersible motor pump for installation in discharge tubes, with channel impeller, single-stage, single-entry. ATEX-compliant version available.


Pumping pre-cleaned chemically neutral waste water, industrial effluent, sewage, fluids not containing any stringy substances, pre-treated by screens and overflow sills; as waste water, mixed sewage and activated sludge pumps in waste water treatment plants, irrigation and drainage pumping stations.

Further technical information about Amacan K

Overview of technical data

Q (50Hz) 140.0 – 7,200.0 (m³/h)
H (50Hz) 1.0 – 30.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 380 V, 400 V, 690 V, 3~
Explosion protection ATEX II 2G T3
No. of impeller entries Single entry
Impeller material (EN standard) 9.4460, JL 1040
Type of installation Close-coupled
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40.0 (°C)
Nozzle position In-line
Pump set location Wet well
Shaft material (EN standard) 1.4021QT700, C45+N, 1.4057
Suction characteristics Non-priming
Type of casing Tubular casing
Type of impeller Multi-vane impeller, Radial, Closed
Casing material (EN standard) JL 1040
eClass assignment 36410103, 36410100, 36410000
Free passage 180.0 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Water, Waste water / sewage, Mining / Dredges
Casing material Cast iron
Maximum drive rating 320.0 (kW)
Type of installation Stationary
Maximum speed of rotation 1200.0 (1/min)