[---skiplinks_navigation---] [---skiplinks_content---] [---skiplinks_search---]
ES000015-Etanorm-V

Etanorm V

Main applications

  • Breweries
  • Food and beverages
  • General Processes
  • Industrial waste water
  • Industry engineering
  • Municipal waste water
  • Surface treatment
  • Suspended solids treatment
  • Waste water

Technical data

Q max 740.0 m³/h
H max 100.0 m
Configurators
Documentation Contact KSB

Design

Single-stage volute casing pump, ratings to EN 733, for vertical installation in closed tanks under atmospheric pressure. Up to an immersion depth of 2000 mm.

Applications

Handling of neutral degreasing and phosphatizing solutions, wash water with degreasing agents, dipping paints, etc.

Further technical information about Etanorm V

Overview of technical data

Q (50Hz) 3.0 – 740.0 (m³/h)
H (50Hz) 1.5 – 100.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
No. of impeller entries Single entry
Maximum submergence 2000.0 (mm)
Impeller material (EN standard) 1.4408 / A743 GR CF8 M, EN-GJL-250 / A 48 CL 35B
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 95.0 (°C)
Nozzle position Variable
Maximum operating pressure PN 10, PN 16
Pump set location Wet well
Shaft material (EN standard) 1.4462, C45+N
Standard EN 733
Suction characteristics Non-priming
Top plate Yes
Type of casing Volute casing
Type of impeller Radial, Closed
Type of connection Flange
Casing material (EN standard) 1.4408 / A743GR CF8 M, EN-GJL-250 / A 48 CL 35B
eClass assignment 36410101, 03641000, 36410100
Installation position Vertical
Shaft seal type Shaft seal ring
Main applications Industry and process engineering, Waste water / sewage
Casing material Cast iron, Stainless steel
Maximum discharge-side pressure 10.0 (bar)
Maximum drive rating 90.0 (kW)
Type of installation Stationary
Maximum speed of rotation 3500.0 (1/min)
Back to product overview