PHZ

Main applications

Cooling water and condensate
Energy
Flood control
Heat transfer, Cooling circuits
Industry engineering
Lake, Damwater extraction
Nuclear Power Stations
Power Stations < 100 MW
Power Stations > 100 MW
Special processes
Turbine Island
Water
Water Extraction
Watertransport

Technical data

Q max 65,000.0 m³/h

H max 25.0 m

Configurators

Documentation Contact KSB

Design

Vertical tubular casing pump with mixed flow propeller. Pump inlet with bellmouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available.

Applications

Handling of raw, pure, service and cooling water in industry, water supply systems, in power stations and seawater desalination plants.

Overview of technical data

Q (50Hz)	5,000.0 – 65,000.0 (m³/h)
H (50Hz)	12.0 – 25.0 (m)
Type of bearing	Rolling element and plain bearings
Casing partition	Radially split
Drive frequency	50 Hz /60 Hz
Type of drive	Electric motor
Drive voltage	Low voltage, high voltage
No. of impeller entries	Single entry
Type of installation	Long-coupled
Type of coupling	Gear, Direct
Type of lubrication	Oil / Product lubrication
Max. permissible fluid temperature	80.0 (°C)
Maximum operating pressure	PN 6, PN 9
Pump set location	Dry installed, Wet well
Suction characteristics	Non-priming
Type of casing	Tubular casing
Type of impeller	Mixed flow impeller, Propeller
Type of connection	Flange
UNSPSC classification	4015150300
eClass assignment	36410000, 36410106, 36410100
Installation position	Vertical
Shaft seal type	Mechanical seal, Gland packing
Main applications	Energy
Casing material	Duplex steel, Chrome nickel steel, Carbon steel
Type of installation	Stationary
Maximum speed of rotation	990.0 (1/min)

Back to product overview