Etanorm-RSY
Main applications
- Biofuels
- Breweries
- Chemical industry
- Food and beverages
- Industry engineering
- Irrigation
- Municipal waste water
- Pressure boosting
- Rawwater transport
- Steel
- Systems
- Waste water
- Water
- Water supply
- Watertreatment
Technical data
Q max
2,280.0 m³/h
H max
90.0 m
Design
Horizontal volute casing pump in back pull-out design, single-stage, with ratings and dimensions to EN 733, radially split volute casing with integrally cast pump feet, replaceable casing wear rings, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, double mechanical seal to EN 12756, drive-end bearings: rolling element bearings, pump-end bearings: plain bearings, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.
Application
Heat transfer systems, hot water recirculation
Further technical information about Etanorm-RSY
Overview of technical data
Q (50Hz) | 50.0 – 2,280.0 (m³/h) |
H (50Hz) | 12.0 – 90.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
No. of impeller entries | Single entry |
Impeller material (EN standard) | JL1040, GJL-250, 1.4408 |
Type of installation | Long-coupled |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 350.0 (°C) |
Nozzle position | End suction |
Maximum operating pressure | PN 16 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | 1.4057.05 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | Radial |
Type of connection | Flange |
Casing material (EN standard) | GJS-400-18-LT, JS1025 |
eClass assignment | 36410100, 36410000, 36410101 |
Installation position | Horizontal |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering |
Casing material | Nodular cast iron |
Maximum discharge-side pressure | 16.0 (bar) |
Type of installation | Stationary |
Maximum speed of rotation | 1750.0 (min) |