Etaline

Glanded in-line pump

Q max 700.0 m³/h

H max 95.0 m

Close-coupled, in-line circulator pump with volute casing and standardized motor.

Hot water heating systems, cooling circuits, air-conditioning, water and service water supply systems, industrial recirculation systems.

Q (50Hz)	2.0 – 700.0 (m³/h)
H (50Hz)	1.5 – 95.0 (m)
Type of bearing	Ball bearings
Casing partition	Radially split
Drive	Electric motor
Drive frequency	50 Hz
Type of drive	Electric motor
Connection to power supply	400 V, 3~
No. of impeller entries	Single entry
Impeller material (EN standard)	1.4408, CC480KK-GS, EN-GJL-250
Type of installation	In-line
Type of coupling	Direct
Type of lubrication	Grease lubrication
Max. permissible fluid temperature	140.0 (°C)
Nozzle position	In-line
Maximum operating pressure	PN 16
Pull-out design	Yes
Pump set location	Dry installed
Shaft material (EN standard)	1.4571, C45+N
Suction characteristics	Non-priming
Suitable for drinking water	Yes
Type of casing	Volute casing
Type of impeller	Closed, Closed / Radial, Multi-vane impeller, Radial
Type of connection	Flange
UNSPSC classification	4515150300
Casing material (EN standard)	JL1040, EN-GJL-250
eClass assignment	36410101, 36410100, 36410000, 36410105
Installation position	Horizontal or vertical
Shaft seal type	Mechanical seal
Main applications	Building services, Water, Industry and process engineering
Casing material	Cast iron
Maximum discharge-side pressure	16.0 (bar)
Maximum drive rating	55.0 (kW)
Type of installation	Stationary
Maximum speed of rotation	3000.0 (1/min)