ES000778-Pumpstation-CK-800

Pumpstation CK 800


Main applications

  • Waste water

Design type

Pump stations

Technical data

Q max 22.0 m³/h
H max 49.0 m

Design

Single-pump or dual-pump station as ready-to-connect package system, with PE-LLD (polyethylene) collecting tank for buried installation. Equipped with either one or two submersible waste water pumps of type Amarex N S (explosion-proof or non-explosion-proof) or Ama-Porter (non-explosion-proof). Tank design to DIN 1986-100 and EN 752/EN 476.

Application

Drainage of buildings and premises, waste water disposal, premises renovation, joint sewage disposal for multiple residential units, pumped drainage

Further technical information about Pumpstation CK 800

Overview of technical data

Q (50Hz) 0.0 – 22.0 (m³/h)
H (50Hz) 0.0 – 49.0 (m)
Type of bearing Ball bearings
Cutter Yes
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Explosion protection MIT / OHNE
Impeller material (EN standard) JL1040
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40.0 (°C)
Shaft material (EN standard) 1.4021
Type of casing Volute casing
Type of impeller Cutter
Casing material (EN standard) PUMPE JL1040
eClass assignment 00000000
Free passage 7.0 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Water, Waste water / sewage, Building services
Casing material Plastics
Maximum drive rating 4.2 (kW)
Type of installation Stationary, Under ground
Maximum speed of rotation 2900.0 (1/min)