Rotex
Main applications
- Breweries
- Drainage
- Food and beverages
- General Processes
- Industry engineering
- Municipal waste water
- Sewage treatment plants
- Surface drainage
- Surface treatment
- Waste water
Technical data
Q max
24.0 m³/h
H max
14.0 m
Design
Vertical single-stage centrifugal pump with discharge to the top and parallel with the pump shaft, pump base designed to act as suction strainer. Pump and motor are rigidly connected by a support column. Supplied ready to be plugged in, with 1.5-metre power cable and level switch.
Application
Automatic drainage of buildings, pits and tanks, lowering of surface water levels and drainage.
Further technical information about Rotex
Overview of technical data
Q (50Hz) | 0.0 – 24.0 (m³/h) |
H (50Hz) | 1.0 – 14.0 (m) |
Type of bearing | Plain bearings |
Drive | Electric motor |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Connection to power supply | 400 V, 3~ |
Maximum submergence | 1700.0 (mm) |
Impeller material (EN standard) | PA,, PA, JL 1040, JL1040 |
Type of coupling | Direct |
Type of lubrication | Product lubrication |
Max. permissible fluid temperature | 90.0 (°C) |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021, P250GH |
Standard | EN 733 |
Suction characteristics | Non-priming |
Type of casing | Volute casing |
Type of impeller | 00, Dreikanalrad, radial, Mehrkanalrad, offen, Zweikanalrad |
Type of connection | Thread |
UNSPSC classification | 4015150300 |
Casing material (EN standard) | JL 1040, JL1040 |
eClass assignment | 36410100, 36410101 |
Free passage | 18.0 (mm) |
Installation position | Vertical |
Shaft seal type | Seal-less |
Main applications | 00, Gebäudetechnik, Wasser, Industrie- und Verfahrenstechnik, Abwasser |
Casing material | Cast iron |
Maximum drive rating | 0.55 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 2900.0 (1/min) |