Main applications

  • Irrigation

Technical data

Q max 3.9 m³/h
H max 60.0 m

Multistage submersible borehole pump with integrated pressure switch, flow sensor and lift check valve.
Electronic dry running protection device with four
sequential start-up attempts, integrated capacitor.
With 15-metre H07 RNF cable with plug.
Double mechanical seal in oil bath.

Rainwater harvesting, pressure boosting, irrigation systems, water extraction

Further technical information about IXO-PRO

Overview of technical data

Q (50Hz) 0.0 – 3.9 (m³/h)
H (50Hz) 8.0 – 60.0 (m)
Type of bearing Ball bearings
Borehole diameter (inc 00, 05
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230 V, 1~
Type of first impeller Radial
Impeller material (EN standard) EDELSTAHL, 1.4301
Type of coupling None
Type of lubrication Product lubrication
Max. permissible fluid temperature 35.0 (°C)
Pump set location Wet well
Shaft material (EN standard) EDELSTAHL. 1.4301
Stage casing material (EN standard) EDELSTAHL, 1.4301
Suction characteristics Non-priming
Type of suction casing 00
Casing material (EN standard) EDELSTAHL, 1.4301
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Water, Building services
Casing material Stainless steel
Maximum drive rating 0.9 (kW)
Type of installation Transportable, Stationary
Maximum speed of rotation 2900.0 (1/min)