Pumpstation CK 800
Main applications
- Waste water
Technical data
Q max
22.0 m³/h
H max
49.0 m
Design
Single-pump or dual-pump station as ready-to-connect package system, with PE-LLD (polyethylene) collecting tank for buried installation. Equipped with either one or two submersible waste water pumps of type Amarex N S (explosion-proof or non-explosion-proof) or Ama-Porter (non-explosion-proof). Tank design to DIN 1986-100 and EN 752/EN 476.
Application
Drainage of buildings and premises, waste water disposal, premises renovation, joint sewage disposal for multiple residential units, pumped drainage
Further technical information about Pumpstation CK 800
Overview of technical data
Q (50Hz) | 0.0 – 22.0 (m³/h) |
H (50Hz) | 0.0 – 49.0 (m) |
Type of bearing | Ball bearings |
Cutter | Yes |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Explosion protection | MIT / OHNE |
Impeller material (EN standard) | JL1040 |
Type of coupling | Direct |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Shaft material (EN standard) | 1.4021 |
Type of casing | Volute casing |
Type of impeller | Cutter |
Casing material (EN standard) | PUMPE JL1040 |
eClass assignment | 00000000 |
Free passage | 7.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Water, Waste water / sewage, Building services |
Casing material | Plastics |
Maximum drive rating | 4.2 (kW) |
Type of installation | Stationary, Under ground |
Maximum speed of rotation | 2900.0 (1/min) |