Etanorm-RX

Etanorm-RX


Main applications

  • Biofuels
  • Desalination
  • Fire fighting and sprinkler systems
  • Irrigation
  • Municipal waste water
  • Pressure boosting
  • Rawwater transport
  • Steel
  • Systems
  • Waste water
  • Water
  • Water supply
  • Water works
  • Watertransport
  • Watertreatment

Design type

Long-coupled design

Technical data

Q max 600.0 m³/h
H max 105.0 m

Design

Horizontal, long-coupled, single-stage volute casing pump in back pull-out design. Replaceable shaft protecting sleeves and casing wear rings.

Applications

Sprinkler systems to VdS and fire protection.

Further technical information about Etanorm-RX

Overview of technical data

Q (50Hz) 18.0 – 600.0 (m³/h)
H (50Hz) 35.0 – 105.0 (m)
Type of bearing Ball bearings
Casing partition Radially split
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor, turbine, I.C. engine
Drive voltage Low voltage
No. of impeller entries Single entry
Impeller material (EN standard) CC480K-GS, CUSN10-C-GS, G-CUSN10
Type of installation Long-coupled
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 20.0 (°C)
Nozzle position End suction
Maximum operating pressure PN 10
Pull-out design Yes
Pump set location Dry installed
Shaft material (EN standard) 1.4057.05
Suction characteristics Non-priming
Type of casing Volute casing
Type of impeller Radial, Closed / Radial, Closed, Multi-vane impeller
Type of connection Flange
Casing material (EN standard) JL 1040, GJL-250
eClass assignment 36410000, 36410101, 36410100
Installation position Horizontal
Shaft seal type Mechanical seal, Gland packing
Main applications Building services, Industry and process engineering, Water
Casing material Cast iron
Maximum discharge-side pressure 10.0 (bar)
Type of installation Stationary
Maximum speed of rotation 2940.0 (1/min)