![LCC-M]([{"name":"portrait_ratio1x1","ratioWidth":1,"ratioHeight":1,"linksForWidth":{"97":"/resource/image/1692/portrait_ratio1x1/97/97/b34ba3c70f34bc0b538d25ec60802c3c/mN/es000217-lcc-m.png","110":"/resource/image/1692/portrait_ratio1x1/110/110/b34ba3c70f34bc0b538d25ec60802c3c/qf/es000217-lcc-m.png","152":"/resource/image/1692/portrait_ratio1x1/152/152/b34ba3c70f34bc0b538d25ec60802c3c/GF/es000217-lcc-m.png","176":"/resource/image/1692/portrait_ratio1x1/176/176/b34ba3c70f34bc0b538d25ec60802c3c/Cb/es000217-lcc-m.png","207":"/resource/image/1692/portrait_ratio1x1/207/207/b34ba3c70f34bc0b538d25ec60802c3c/iG/es000217-lcc-m.png","290":"/resource/image/1692/portrait_ratio1x1/290/290/b34ba3c70f34bc0b538d25ec60802c3c/tM/es000217-lcc-m.png","345":"/resource/image/1692/portrait_ratio1x1/345/345/b34ba3c70f34bc0b538d25ec60802c3c/KZ/es000217-lcc-m.png","555":"/resource/image/1692/portrait_ratio1x1/555/555/b34ba3c70f34bc0b538d25ec60802c3c/ac/es000217-lcc-m.png"}},{"name":"landscape_ratio4x3","ratioWidth":4,"ratioHeight":3,"linksForWidth":{"320":"/resource/image/1692/landscape_ratio4x3/320/240/ef0c76354b3898e48455a83b6ce63ebc/CX/es000217-lcc-m.png","375":"/resource/image/1692/landscape_ratio4x3/375/281/ef0c76354b3898e48455a83b6ce63ebc/Ee/es000217-lcc-m.png","414":"/resource/image/1692/landscape_ratio4x3/414/310/ef0c76354b3898e48455a83b6ce63ebc/kx/es000217-lcc-m.png","500":"/resource/image/1692/landscape_ratio4x3/500/375/ef0c76354b3898e48455a83b6ce63ebc/mA/es000217-lcc-m.png","768":"/resource/image/1692/landscape_ratio4x3/768/576/ef0c76354b3898e48455a83b6ce63ebc/JH/es000217-lcc-m.png","1000":"/resource/image/1692/landscape_ratio4x3/1000/750/ef0c76354b3898e48455a83b6ce63ebc/mJ/es000217-lcc-m.png","1200":"/resource/image/1692/landscape_ratio4x3/1200/900/ef0c76354b3898e48455a83b6ce63ebc/WI/es000217-lcc-m.png"}}] "LCC-M (© KSB AG)")
LCC-M
Main applications
- Ash removal
- Dredging
- Hard Rock mining
- Industrial Process
- Mineral Mining
- Mining
- Slurry
Technical data
Q max
3,405.0 m³/h
H max
90.0 m
Design
The wetted pump end (casing, impeller and suction plate / liner) is made of white cast iron. Design optimised to permit easy dismantling and reassembly for maintenance and inspections.
Application
Reliable pump for high heads and moderately corrosive slurries. Used in mine dewatering, ash and tailings transport and dredging.
Further technical information about LCC-M
Overview of technical data
| Q (50Hz) | 25.0 – 3,405.0 (m³/h) |
| H (50Hz) | 5.0 – 90.0 (m) |
| Type of bearing | Rolling element bearings |
| Type of drive | Electric motor, turbine, I.C. engine |
| Type of coupling | Direct, Gear, None, Variable speed coupling, Jack shaft / Belt drive, Float switch, Bubbler system |
| Type of lubrication | Grease / Oil lubrication |
| Pump set location | Dry installed, Wet well, Dry installed, floodable |
| Free passage | 135.0 (mm) |
| Shaft seal type | Gland packing, Mechanical seal, Hydrodynamic seal |
| Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges, Shipping / Shipbuilding |
| Type of installation | Transportable, Stationary |