Etaline DL
Main applications
- Biogas
- Breweries
- Building services
- Flood control
- Food and beverages
- HVAC
- Heat transfer, Cooling circuits
- Heating / ventilation / air-condition
- Industry engineering
- Irrigation
- Special processes
- Steam and hot water, district heating
- Steel
- Waste water
- Water
- Water supply
- Watertransport
Technical data
Q max
150.0 m³/h
H max
21.0 m
Design
Single-stage close-coupled in-line volute casing pump as twin pump, with PumpDrive variable speed system and common motor/pump shaft
Application
Heating systems, air-conditioning systems, cooling circuits, water supply systems (not approved for drinking water according to the German Environment Agency), service water supply systems, industrial recirculation systems
Further technical information about Etaline DL
Overview of technical data
Q (50Hz) | 1.0 – 150.0 (m³/h) |
H (50Hz) | 1.0 – 21.0 (m) |
Type of bearing | Ball bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Impeller material (EN standard) | EN-GJL-150, PSU-GF30 |
Type of installation | In-line |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 120.0 (°C) |
Nozzle position | In-line |
Maximum operating pressure | PN 10 |
Pull-out design | Yes |
Pump set location | Dry installed |
Shaft material (EN standard) | EDELSTAHL |
Suction characteristics | Non-priming |
Type of connection | Screw-ended, flange |
Casing material (EN standard) | EN-GJL-150, EN-GJL-200 |
Installation position | Horizontal or vertical |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering, Building services |
Casing material | Cast iron |
Type of installation | Stationary |
Maximum speed of rotation | 2900.0 (1/min) |