Etaline Z

Main applications

  • Breweries
  • Building services
  • Food and beverages
  • HVAC
  • Heat transfer, Cooling circuits
  • Heating / ventilation / air-condition
  • Industry engineering
  • Special processes
  • Steam and hot water, district heating
  • Steel
  • Water

Design type

Glanded in-line pump

Technical data

Q max 1095.0 m³/h
H max 38.5 m


Close-coupled, in-line twin circulator pump, pump shaft and motor shaft are rigidly coupled.


Hot water heating systems, cooling circuits, air-conditioning systems, water and service water supply systems, industrial recirculation systems.

Further technical information about Etaline Z

Overview of technical data

Q (50Hz) 2.0 – 1095.0 (m³/h)
H (50Hz) 2.0 – 38.5 (m)
Type of bearing Ball bearings
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 400 V, 3~
Impeller material (EN standard) 1.4408, CC480K-GS, EN-GJL-250
Type of installation In-line
Type of coupling Direct
Type of lubrication Grease lubrication
Max. permissible fluid temperature 140 (°C)
Nozzle position In-line
Maximum operating pressure PN 16
Pump set location Dry installed
Shaft material (EN standard) 1.4571, C45+N
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed, Radial
Type of connection Flange
UNSPSC classification 4515150300
Casing material (EN standard) EN-GJL-250
eClass assignment 36410101, 36410100
Installation position Horizontal or vertical
Shaft seal type Mechanical seal
Main applications Water, Building services, Industry and process engineering
Casing material Cast iron
Maximum discharge-side pressure 16 (bar)
Maximum drive rating 55 (kW)
Type of installation Stationary
Maximum speed of rotation 2900 (1/min)