ES000131-Riotherm

Riotherm


Main applications

  • Building services
  • HVAC
  • Heat transfer, Cooling circuits
  • Heating / ventilation / air-condition
  • Industry engineering
  • Special processes

Design type

Circulator pumps

Technical data

Q max 10.0 m³/h
H max 6.0 m

Design

Screw-ended dry rotor pump with mechanical seal and fixed speed.

Applications

Hot water supply systems, swimming pools, cooling circuits and industrial plants.

Further technical information about Riotherm

Overview of technical data

Q (50Hz) 0.0 – 10.0 (m³/h)
H (50Hz) 0.4 – 6.0 (m)
Type of bearing Ball bearings
Drive Electric motor
Drive frequency 50 Hz
Type of drive Electric motor
Drive voltage Low voltage
Impeller material (EN standard) KUNSTSTOFF
Type of installation In-line
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 110 (°C)
Nozzle position In-line
Maximum operating pressure PN 10
Pump set location Dry installed
Shaft material (EN standard) CHROM-NICKEL-STAHL, 1.4305
Suction characteristics Non-priming
Suitable for drinking water Yes
Type of casing Volute casing
Type of impeller Closed / Radial
Type of connection Thread
Casing material (EN standard) JL1040, BRONZE
eClass assignment 36410000, 36410100, 36410101, 36410105
Installation position Any
Shaft seal type Seal-less, Mechanical seal
Main applications Building services, Water
Casing material Cast iron, Bronze
Maximum discharge-side pressure 10 (bar)
Maximum drive rating 0,12 (kW)
Type of installation Stationary
Maximum speed of rotation 2850 (1/min)