ES000787-Vitaprime

Vitaprime


Main applications

  • Breweries
  • Chemical industry
  • Creameries
  • Food and beverages
  • Industry engineering
  • Pharmaceutical/Biotechnology
  • Soft drinks

Design type

Hygienic Pump

Technical data

Q max 55.0 m³/h
H max 45.0 m

Design
Service-friendly, self-priming side channel pump in back pull-out design. Hygienic design; wetted components of stainless steel 316L with supreme surface finish quality thanks to electropolishing; open impeller; highly suitable for CIP/SIP routines; FDA-approved elastomers. Can be combined with all commercially available standardised motors thanks to drive shaft supported by separate bearings. Close-coupled design.
Applications
For hygienic applications in the food, beverage and pharmaceutical industries

Further technical information about Vitaprime

Overview of technical data

Q (50Hz) 1.0 – 55.0 (m³/h)
H (50Hz) 3.5 – 45.0 (m)
Type of bearing Ball bearings
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230/400V, 400/690 V, 3~
Heatable Yes
Impeller material (EN standard) 1.4409 (AISI 316L)
Type of installation Close-coupled
Type of lubrication Grease / Product lubrication
Max. permissible fluid temperature 140.0 (°C)
Nozzle position Side-top
Maximum operating pressure 10
Pump set location Dry installed
Suction characteristics Self-priming
Suitable for drinking water Yes
Type of impeller Open
Type of connection Screw-ended, flange
Casing material (EN standard) 1.4409 (AISI CF3M)
Installation position Horizontal
Shaft seal type Mechanical seal
Main applications Industry and process engineering, Food,beverages and pharmaceutical industry
Type of installation Transportable, Stationary
Maximum speed of rotation 1750.0 (min)