Lubricoupe TO

Technical data

Q max 30.0 m³/h
H max 23.0 m


Vertical, single-stage centrifugal pump with open impeller.


Lubricoupe units are used to pump oil, cooling lubricants, solvents, degreasing agents, wash water in spray-paint and cooling systems, machine tools and welding machines.

Further technical information about Lubricoupe TO

Overview of technical data

Q (50Hz) 0.3 – 30.0 (m³/h)
H (50Hz) 1.4 – 23.0 (m)
Type of bearing Ball bearings
Diffuser material (EN standard) JL 1030
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 230/400 V, 3~
Impeller material (EN standard) NORYL
Type of installation Close-coupled
Type of lubrication Grease / Product lubrication
Max. permissible fluid temperature 60.0 (°C)
Nozzle position End suction
Maximum operating pressure 2,2
Pump set location Dry installed
Suction casing material (EN standard) JL 1030
Suction characteristics Non-priming
Top plate Yes
Type of casing Volute casing
Type of impeller Open
Type of connection Internal thread
UNSPSC classification 4015150300
Casing material (EN standard) JL 1030
eClass assignment 36410101
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Industry and process engineering
Casing material Cast iron
Maximum drive rating 2.2 (kW)
Type of installation Stationary
Maximum speed of rotation 2900.0 (1/min)