Ama-Porter CK-Pumpstation
Main applications
- Building services
- Drainage
- Pressure Drainage
- Sewage lifting units
- Sewage treatment plants
- Waste water
- Waste water / sewage
- Waste water lifting units
Technical data
Q max
40.0 m³/h
H max
16.0 m
Design
Single-pump or dual-pump station as ready-to-connect package system, with PE-LLD (polyethylene) collecting tank for buried installation. Equipped with either one or two submersible waste water pumps of type Ama-Porter (non-explosion-proof). Tank design to DIN 1986-100 and EN 752/EN 476.
Application
Drainage of buildings and premises, waste water disposal, premises renovation, joint sewage disposal for multiple residential units, pumped drainage
Further technical information about Ama-Porter CK-Pumpstation
Overview of technical data
Q (50Hz) | 0.0 – 40.0 (m³/h) |
H (50Hz) | 0.0 – 16.0 (m) |
Type of bearing | Ball bearings |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Explosion protection | OHNE |
Explosion protection | OHNE |
Impeller material (EN standard) | JL1030 |
Type of coupling | Direct |
Type of lubrication | Product lubrication |
Max. permissible fluid temperature | 40.0 (°C) |
Number of pumps | 2 |
Type of connection | clamp coupling |
Casing material (EN standard) | PUMPE JL1030 |
Free passage | 60.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Water, Waste water / sewage, Building services |
Casing material | Cast iron |
Maximum drive rating | 1.5 (kW) |
Type of installation | Stationary, Under ground |
Maximum speed of rotation | 2900 |