ES000100-Amacan-K

Amacan K


Main applications

  • Advanced treatment / 3.stage
  • Bio. treatment / 2.stage
  • Drainage pump stations
  • Flood / stormwater holding tanks
  • Flood control
  • Industrial waste water
  • Mech. treatment / 1.stage
  • Mining
  • Municipal waste water
  • Process
  • Sewage treatment plants
  • Surface drainage
  • Suspended solids treatment
  • Waste water
  • Waste water transport

Design type

Waste water transport

Technical data

Q max 7200.0 m³/h
H max 30.0 m

Design

Wet-installed submersible motor pump with non-clogging impeller, singlestage, single-entry, for installation in discharge tubes, explosion protection to ATEX II G2 T3.

Applications

Handling of pre-cleaned, chemically neutral waste water, industrial effluents and sewage, fluids not containing any stringy substances pre-treated by screens and sills, as waste water, mixed water and activated sludge pump in effluent treatment plants, irrigation and drainage pumping systems.

Further technical information about Amacan K

Overview of technical data

Q (50Hz) 140.0 – 7200.0 (m³/h)
H (50Hz) 1.0 – 30.0 (m)
Type of bearing Rolling element bearings
Casing partition Radially split
Drive Electric motor
Drive frequency 50 Hz /60 Hz
Type of drive Electric motor
Drive voltage Low voltage
Connection to power supply 380 V, 400 V, 690 V, 3~
Explosion protection ATEX II 2G T3
No. of impeller entries Single entry
Impeller material (EN standard) 9.4460, JL 1040
Type of installation Close-coupled
Type of coupling None
Type of lubrication Grease lubrication
Max. permissible fluid temperature 40 (°C)
Nozzle position In-line
Pump set location Wet well
Shaft material (EN standard) 1.4021QT700, C45+N, 1.4057
Suction characteristics Non-priming
Type of casing Tubular casing
Type of impeller Multi-vane impeller, Radial, Closed
Casing material (EN standard) JL 1040
eClass assignment 36410103, 36410100, 36410000
Free passage 180 (mm)
Installation position Vertical
Shaft seal type Mechanical seal
Main applications Water, Waste water / sewage, Mining / Dredges
Casing material Cast iron
Maximum drive rating 320 (kW)
Type of installation Stationary
Maximum speed of rotation 1200 (1/min)